Menu
Your Cart

CHEVALIER FSG-818SP 8" x 18" SUPER PRECISION SURFACE AND FORM GRINDER

SHIPPING & DELIVERY
Call us now
Ask a question
CHEVALIER FSG-818SP 8" x 18" SUPER PRECISION SURFACE AND FORM GRINDER
CHEVALIER FSG-818SP 8" x 18" SUPER PRECISION SURFACE AND FORM GRINDER
Based on 0 reviews. - Write a review
$19,400.00
  • Stock: In Stock
  • Model: FSG-818SP
  • Weight: 2,310.00lb
  • Dimensions:
  • 58.00in x 48.50in x 84.00in
  • SKU: FSG-818SP
CHEVALIER CHEVALIER
Add to Cart
Buy Now Question
Add to Wish List Compare this Product
  • Manual operation
  • 2 HP Dynamically balanced spindle drive motor
  • 0.000080" Flatness for the entire working surface
  • 0.000050" Vertical micro feed
  • Permanently lubricated and sealed cartridge-type spindle is supported by four pieces of class 7 P4 super precision angular contact ball bearings
  • Vertical handwheel at waist level
  • Honeycomb ribbed column with D2 hardened and ground guideway systems
  • Elevating and crossfeed leadscrews are hardened and ground
  • Table traverses on linear ball bearings and D2 hardened and ground guideways
  • Saddle travels on Turcite-B coated and hand scraped double V guideways
  • Full 13" clearance between 8" grinding wheel and magnetic chuck surface
  • Automatic lubrication system
  • Meehanite castings
  • Shown with optional accessories installed
Table Size (W x L/In. | mm) 8 x 18 | 203 x 480
Grinding Capacity (Max./In. | mm)
Longitudinal - Length
Crosswise - Width
19-3/4 | 500
9 | 230
Table Surface to Spindle Centerline Distance (Max./In. | mm) 19-3/4 | 500
Standard Magnetic Chuck Size (W x L/In. | mm) 7-7/8 x 17-3/4 | 200 x 450
Longitudinal Movement of Table - Manual (Max./In. | mm) 20 | 510
Cross Movement of Table - Manual (Max./In. | mm) 9 | 230
Crossfeed Handwheel per Revolution (In. | mm) .1968 | 5
Crossfeed Handwheel per Graduation (In. | mm) .000787 | .02
Crossfeed Microfeed - Optional (In. | mm) .000050 | .001
Wheelhead Vertical Downfeed Handwheel per Revolution (In. | mm) .0393 | 1
Wheelhead Vertical Downfeed Handwheel per Graduation (In. | mm) .000196 | .005
Wheelhead Vertical Micro Downfeed Rapid Travel - Optional (IPM | mm/min.) 12.99 | 330
Wheelhead Vertical Micro Downfeed per Revolution (In. | mm) .000787 | .02
Wheelhead Vertical Micro Downfeed per Graduation (In. | mm) .000050 | .001
Standard Grinding Wheel Size (Dia. x W x Bore/In. | mm) 8 x 1/2 - 1 x 1-1/4 | 203 x 12.7 - 25.4 x 31.75
Grinding Spindle Drive Speed (RPM) 3,450
Grinding Spindle Drive Motor (HP | kW) 2 | 1.5,
220V/440V/3 Phase/60 Hz.,
Prewired 220V
Elevating Drive Motor - Optional (HP | kW) 0.25 | 0.19
Floor Space Required Dimensions (L x W x H/In. | mm) 68.89 x 53.54 x 73.62 | 1,750 x 1,360 x 1,870
Packing Dimensions (L x W x H/In. | mm) 58 x 48.50 x 84 | 1,473 x 1,232 x 2,134
Net Weight (Lbs. | Kg.) 2,310 | 1,050
Design and specifications are subject to change without notice.
  • Wheel Flange and Weights
  • Wheel Flange Extractor
  • Dust Protection Plate
  • Balancing Arbor
  • Magnetic Chuck Setting Screw
  • Spare Steel Wire
  • Coupling
  • Leveling Screw Set and Pads
  • Toolbox and Tools
  • Operating Manual and Parts List
  • O. S. WALKER 8" x 18" Ceramax Permanent Magnetic Chuck
  • KANETSU or CHEVALIER 7-7/8" x 17-3/4" Permanent Magnetic Chuck
  • CHEVALIER 7-7/8" x 17-3/4" Transverse Bar Fine Pole Permanent Magnetic Chuck
  • CHEVALIER 5-7/8" x 11-3/4" Inclinable Permanent Magnetic Chuck
  • CHEVALIER 7-7/8" x 17-3/4" Electromagnetic Chuck and Chuck Controller with Variable Holding and Auto Demagnetizer
  • CHEVALIER 7-7/8" x 17-3/4" Transverse Bar Fine Pole Electromagnetic Chuck and Chuck Controller with Variable Holding and Auto Demagnetizer
  • CHEVALIER 5-7/8" x 11-3/4" Inclinable Electromagnetic Chuck and Chuck Controller with Variable Holding and Auto Demagnetizer
  • O. S. WALKER 8" x 18" LBP Fine Pole Electromagnetic Chuck and Chuck Controller with Variable Holding and Auto Demagnetizer
  • O. S. WALKER Manual Type Chuck Controller
  • O. S. WALKER Automatic Type Chuck Controller
  • Digital Readout System Surface Grinder Package - Elevating Axis 18" Travel - Factory Installed
  • Digital Readout System Surface Grinder Package - Crossfeed Axis 10" Travel - Factory Installed
  • Digital Readout System Surface Grinder Package - Crossfeed Axis and Elevating Axis 10" x 18" Travel - Factory Installed
  • 2" x 3" Precision Toolmaker's Vise
  • 2-31/64" x 3-15/16" Precision Toolmaker's Vise
  • 3" x 3-15/16" Precision Toolmaker's Vise
  • 3-1/2" x 5" Precision Toolmaker's Vise
  • 3-15/16" x 5" Precision Toolmaker's Vise
  • 0.1 Karat Diamond Dresser with Diamond
  • 0.5 Karat Diamond Dresser with Diamond
  • Parallel Dressing Attachment
  • Adapter for Mounting E-Type Opti Dresser
  • Wheel Balancing Stand with Leveling Bubble
  • Roller Type Balancing Stand
  • 1/2 HP Heavy Duty Dust Collector
  • Exhaust Hood and Heavy Duty Dust Collector
  • 9 Gallons Combination Coolant System and Dust Collector
  • 13.25 Gallons Coolant System with Magnetic Separator
  • 9 Gallons Combination Coolant System and Dust Collector with Magnetic Separator
  • 22.5 Gallons Coolant System with Paper Filter
  • 11.1 Gallons Coolant System
  • 24 Gallons Coolant System
  • Splash Guard and Coolant Nozzle
  • 230V AC Frequency Control Variable Spindle Speeds - Factory Installed
  • 460V AC Frequency Control Variable Spindle Speeds - Factory Installed
  • Micro Crossfeed Device
  • Rapid Elevating System - Factory Installed
  • Wheel Hub - Flange and Weights
  • Punch Former
  • Universal Wheel Guard for Side Forming
  • Machine Lamp
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More