Name: JET 354550 J-A5816 15" VARIABLE SPEED DRILL PRESS
Brand: JET
SKU: 354550
Price: 2528.57 USD
Availability: InStock

JET 354550 J-A5816 15" VARIABLE SPEED DRILL PRESS

Based on 0 reviews. - Write a review

$2,528.57

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

This drill press uses a variable-speed motor with the stepped-pulley system, and comes equipped with a continuously variable transmission
This enables use at a wide range of speeds, as well as the ability to change speed during operation
A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control
This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck
A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes
Full bearing support on quill for maximum spindle stiffness
Handwheel speed adjustment of 400 to 5,000 RPM, an LED speed display on the face plate of the machine
Large 2-1/4" quill for greater accuracy
6" Stroke for deep hole application
3" Column diameter for maximum head support
The large worktable provides the operator with room to work and ample support for the workpiece
Machine T-slotted base

Drill to Center of Circle (In.)	15
Drilling Capacity In Cast Iron (In.)	5/8
Drilling Capacity In Mild Steel (In.)	1/2
Number of Spindle Speeds	Variable Speed
Range of Spindle Speeds (RPM)	400 - 5,000
Spindle Taper	MT-2
Spindle Travel (In.)	6
Column Diameter (In.)	3
Maximum Distance Column Face to Spindle Center (In.)	7-1/2
Maximum Distance Table Surface to Spindle End (In.)	25-3/4
Maximum Distance Base Surface to Spindle End (In.)	44-1/2
Table Size (W x L/In.)	17-3/4 x 15-1/4
Table Working Surface (W x L/In.)	14-1/2 x 12-1/2
Maximum Table Travel (In.)	16-3/4
Number of T-Slots in Table	2
Size of T-Slots in Table (W/In.)	1/2
Distance Between T-Slots Centers in Table (In.)	5-5/16
Work Table Weight Capacity (Lbs.)	90
Base Size (W x L/In.)	14-3/16 x 20-7/8
Base Working Surface (W x L/In.)	11-13/16 x 12-1/8
Number of T-Slots in Base	2
Size of T-Slots in Base (W/In.)	1/2
Main Motor (HP)	1, 115V/230V/1 Phase/60 Hz., Prewired 115V
Overall Dimensions (L x W x H/In.)	30 x 20 x 71
Net Weight (Lbs.)	426
Design and specifications are subject to change without notice.

JET 354550 J-A5816 15" VARIABLE SPEED DRILL PRESS