Name: KENT USA RML-1660VT 16" X 60" PRECISION ELECTRONIC VARIABLE SPEED ENGINE LATHE
Brand: KENT USA
SKU: RML-1660VT
Price: 26250.00 USD
Availability: InStock

KENT USA RML-1660VT 16" X 60" PRECISION ELECTRONIC VARIABLE SPEED ENGINE LATHE

Based on 0 reviews. - Write a review

$26,250.00

Stock: In Stock
Model: RML-1660VT
Weight: 4,180.00lb
Dimensions:
105.00in x 44.00in x 66.00in
SKU: RML-1660VT

KENT
USA

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

2-1/16" Diameter through hole spindle
AC Frequency drive with infinitely variable speed control and digital RPM display in high | low gear speed ranges
Dynamically balanced alloy steel spindle with three point support
Headstock gears are induction hardened and precision ground
Full one piece cast iron machine base for maximum rigidity coupled with induction hardened and ground ways
Gap bed section provided for larger diameter work
Universal inch/metric gearbox allows for extra wide range of threading capability without the need of change gears
Inch/metric reading on dial
Quick feed reversal knob allows instant feed reversal without stopping the main motor
Safety device disengages feed when overloaded
Dovetails and T-slots on cross slide for mounting optional attachments
Hardened ground tailstock quill has an inch/metric graduated
Jog button for effortless spindle speed changes
Front pull out chip tray for easy maintenance
One-shot pump conveniently lubricates bed and cross slide ways
Safety full length foot brake
Capable of being run on single phase or 3 phase power
Model RML-1640VT 16" x 40" Precision Electronic Variable Speed Engine Lathe shown

Swing Over Bed (In. \| mm)	16-3/16 \| 410
Swing Over Cross Slide (In. \| mm)	10-3/8 \| 264
Swing Over Gap (In. \| mm)	23 \| 584
Gap Width in Front of Face Plate (In. \| mm)	4.48 \| 114
Width of Bed (In. \| mm)	10-1/4 \| 260
Distance Between Centers (In. \| mm)	60 \| 1500
Cross Slide Travel (In. \| mm)	8-11/16 \| 220
Compound Slide Travel (In. \| mm)	5-1/2 \| 140
Spindle Through Hole Diameter (In. \| mm)	2-1/16 \| 52.5
Spindle Nose - Camlock	D1-6
Spindle Taper with Sleeve	MT-6 (MT-4)
Spindle Speeds - 2 Ranges	Infinitely Variable
Spindle Speed Range (RPM)	Low: 40 - 400 High: 250 - 2500
Range of Longitudinal Feeds (IPR)	.002 - .067
Range of Cross Feeds (IPR)	.001 - .0375
Number of Inch Threads	45
Range of Inch Threads (TPI)	2 - 72
Number of Metric Threads	39
Range of Metric Threads (mm)	.2 - 14
Number of Diametral Pitch Threads	21
Range of Diametral Pitch Threads (D.P.)	8 - 44
Number of Modular Pitch Threads	18
Range of Modular Pitch Threads (M.P.)	.3 - 3.5
Leadscrew Diameter (In. \| mm)	1-1/8 \| 28.5
Leadscrew Thread Pitch (TPI)	4
Tailstock Quill Travel (In. \| mm)	6 \| 155
Tailstock Quill Diameter (In. \| mm)	2 \| 51
Tailstock Quill Taper	MT-4
Main Motor (HP \| kW)	5 \| 3.72 220V/3 \| 1 Phase/60 Hz., Prewired 220V/3 Phase
Coolant Pump Motor (HP \| kW)	1/8 \| 0.09
Overall Dimensions (L x W x H/In.)	99 x 40 x 62
Packing Dimensions (L x W x H/In.)	105 x 44 x 66
Net Weight (Lbs.)	3,740
Gross Weight (Lbs.)	4,180
Design and specifications are subject to change without notice.