Name: SHARP 1440V 14" X 40" DIGITAL VARIABLE SPEED ENGINE LATHE
Brand: SHARP
SKU: 1440V
Price: 19720.00 USD
Availability: InStock

SHARP 1440V 14" X 40" DIGITAL VARIABLE SPEED ENGINE LATHE

Based on 0 reviews. - Write a review

$19,720.00

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

Digital Variable Speed (DVS) spindle drive with digital speed display
Hi-Lo spindle speed gear shift, range from 30 to 2,200 RPM
Forge steel spindle supported by two high precision tapered roller bearings to ensure precise, reliable turning at any speed
Heavy duty D1-4 camlock spindle nose
Hardened and ground headstock gears and shafts are lubricated in oil bath
Induction hardened and ground bedways for rigid structure
8-1/8" Extra wide bedways with a large apron, compound and a generous 13-1/4" cross slide allows heavier cutting with less vibration
Removable gap for large diameter applications
Carriage equipped with overload clutch to protect gears and leadscrews
Totally enclosed gearbox design use levers to set different threads and feeds
Thread and feed chart for inch and metric
Inch and metric dual dials with direct readings for cross and compound feeds
Directional control of carriage feed at side of apron for easy operation
Centralized push button controls with emergency stop and spindle jog
Heavy cast iron base to ensure rigid and stable operation for the life of the machine
Tailstock has tang slot and inch/metric graduations on quill
Electrically activated foot brake for quick stopping action
Frontal removal chip and coolant tray
Standard with full length splash guard
Available for 220V/3 or 1 Phase/60 Hz. electric, prewired 220V/3 Phase

Swing Over Bed (In. \| mm)	14.01 \| 355.85
Swing Over Cross Slide (In. \| mm)	8-5/8 \| 219.07
Swing Over Gap (In. \| mm)	20 \| 508
Gap Width in Front of Face Plate (In. \| mm)	9-1/4 \| 234.95
Width of Bed (In. \| mm)	8-1/8 \| 206.37
Distance Between Centers (In. \| mm)	40 \| 1016
Cross Slide Travel (In. \| mm)	7 \| 177.8
Compound Slide Travel (In. \| mm)	4 \| 101.6
Spindle Through Hole Diameter (In. \| mm)	1-1/2 \| 38.1
Spindle Nose - Camlock	D1-4
Spindle Bore Taper	MT-5
Number of Spindle Speeds - 2 Ranges	Infinitely Variable
Range of Spindle Speeds (RPM)	Low: 30 - 405 High: 165 - 2,200
Number of Longitudinal Feeds	40
Range of Longitudinal Feeds (IPR)	.0012 - .0304
Number of Cross Feeds	40
Range of Cross Feeds (IPR)	.0003 - .0076
Number of Inch Threads	40
Range of Inch Threads (TPI)	4 - 112
Number of Metric Threads	22
Range of Metric Threads (mm)	.45 - 7.5
Leadscrew Diameter (In. \| mm)	7/8 \| 22.22
Leadscrew Thread Pitch (TPI)	8
Width of Apron (In. \| mm)	11 \| 279.4
Length of Bed (In. \| mm)	66 \| 1,676.4
Tailstock Quill Travel (In. \| mm)	4-1/2 \| 114.3
Tailstock Quill Diameter (In. \| mm)	1-3/4 \| 44.45
Tailstock Quill Taper	MT-3
Main Motor (HP \| kW)	3 \| 2.23 220V/3 or 1Phase/60 Hz., Prewired 220V/3 Phase
Motor Transformer Installed - Optional	380V, 440V or 575V/3 Phase
Power Consumptions (Volts \| kVA \| Amps)	220 \| 3.5 \| 10
Power Consumptions (Volts \| kVA \| Amps)	440 \| 3.5 \| 5
Machine Dimensions (L x W x H/In.)	75.5 x 29 x 46.5
Net Weight (Lbs.)	1,650
Design and specifications are subject to change without notice.