Name: JET 690651 JTM-1050EVS2/230 10" X 50" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH ACU-RITE 203 3-AXIS (QUILL) DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR
Brand: JET
SKU: 690651
Price: 22564.29 USD
Availability: InStock

JET 690651 JTM-1050EVS2/230 10" X 50" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH ACU-RITE 203 3-AXIS (QUILL) DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR

Based on 0 reviews. - Write a review

$22,564.29

Stock: In Stock
Model: JTM-1050EVS2/230
Weight: 2,486.00lb
Dimensions:
66.00in x 63.00in x 86.00in
SKU: 690651

JET

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

CSA/CUS Certified
Certified Meehanite® casting with enhanced ribbing ensures rigidity and tolerance retention
Precision bored and honed milling head
High precision Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Spindle head is internally cooled extending bearing, belt and motor life
Large diameter quill is chromed
Heavy-duty spindle brake stops the spindle and interrupts the power, preventing accidental start-ups for added safety
Quick spindle feed nut
One piece quill pinion and shaft
Three-stage power downfeed with automatic stop
Hardened and precision ground table and ways up to 54 HRC for greater accuracy
The X and Y-axis are coated with Turcite-B for reduced vibration and smooth movements
Adjustable gibs throughout
Dual locks on all movable surfaces
Inverter drive system and emergency stop are located on a swing away control box moves all major functions at the operators fingertips
The electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessories
Automatic lubrication every 30 minutes with a flow of 3 to 6 cc/cy reduces maintenance
The innovative design of the machine base provides an easier solution to leveling the machine without raising it up off the floor
Internal coolant tank built into casting base for use with coolant system, coolant pump not included
Shown with ACU-RITE 203 2-Axis DRO Milling Machine Package and X, Y-Axis Power Feeds and Power Draw Bar installed

Table Size (W x L/In.)	10 x 50
Spindle Taper	R8
Diameter of Quill (In.)	3-3/8
Number of Spindle Speeds	Electronic Variable Speed
Range of Spindle Speeds (RPM)	60 - 4,500
Quill Down Feed Rates (IPR)	.0015 - .003 - .006
Spindle Travel (In.)	5
Head Movement (Right or Left \| Front or Back)	90° \| 45°
Maximum Distance Spindle Nose to Table (In.)	20-3/4
Maximum Distance Spindle Center to Column (In.)	26-3/4
Minimum Distance Spindle Center to Column (In.)	4-3/4
Collet Capacity (In.)	1/8 - 7/8
Maximum Table Longitudinal Travel (In.)	29-7/8
Maximum Table Cross Travel (In.)	14-3/4
Maximum Knee Travel (In.)	16-1/8
Maximum Ram Travel (In.)	17-3/8
Number of T-Slots	3
Size of T-Slots (W x D/In.)	5/8 x 3/4
Distance Between T-Slot Centers (In.)	2-1/2
Maximum Work Table Weight Capacity (Lb.)	840
Saddle Width (In.)	20
Column Width (In.)	11-3/8
Main Motor (HP)	3, 230V/3 Phase/60 Hz.
Overall Dimensions (W x D x H/In.)	66 x 63 x 86
Net Weight (Lbs.)	2,486
Shipping Weight (Lbs.)	2,618
Design and specifications are subject to change without notice.