Menu
Your Cart

TURNTEK PA-35440-6 35" X 440" LARGE SWING HOLLOW SPINDLE OIL COUNTRY LATHE

SHIPPING & DELIVERY
Call us now
Ask a question
TURNTEK PA-35440-6 35" X 440" LARGE SWING HOLLOW SPINDLE OIL COUNTRY LATHE
Call For Pricing
TURNTEK PA-35440-6 35" X 440" LARGE SWING HOLLOW SPINDLE OIL COUNTRY LATHE
Based on 0 reviews. - Write a review
Call For Pricing
1-562-623-9089
sales@machinetools4sale.com
  • Stock: In Stock
  • Model: PA-35440-6
  • Dimensions:
  • 522.00in x 71.00in x 53.00in
  • SKU: PA-35440-6
TURNTEK TURNTEK

Build to order to meet your requirements and applications, direct from factory and save. Our manufacturer accepts custom design for special applications, per your requirements.

  • Forged alloy steel spindle support with opposed high precision taper roller bearings
  • Hardened and precision ground headstock drive gears and shafts to provide quiet and efficient operation through out the full range of spindle speeds
  • 6.023" | 153 mm Spindle bore, ASA A2-11 spindle nose
  • 20 HP | 15 kW Dual voltage main motor, 18 spindle speeds, 7 - 700 RPM spindle speed range
  • Electromagnetic spindle brake system
  • Front and rear chucks are optionally available
  • Sliding front chuck guard with limited switch and "Jog" button and a fixed rear chuck guard for operation safety as options
  • One-piece "monolithic" floor type cast bed is constructed of high grade, alloyed cast iron, normalized and aged to achieve maximum stability
  • 22.04" | 560 mm Wide two-shear bed way is designed with an additional 3rd carriage support guide way that adds up to 25.98" | 660 mm wide on the front of the bed to provide additional support and prevent deflection even in the heaviest cuts
  • Induction hardened and precision ground bed ways and carriage support guide way, Rockwell HRC 46 - 52, provide high accuracy and durability
  • Hardened and precision ground cross slide ways and screw
  • Automatic lubrication system to ways and screws
  • Totally enclosed universal Inch | Metric gear box with lever operation
  • Thread chasing dial
  • Pressurized one shot lube system for cross slide and carriage
  • The leadscrew is covered by a stainless steel shroud to increase operator safety and longevity
  • 6-way Rapid traverse for saddle, cross slide and power feed to top slide
  • 8.07" | 205 mm Square heavy duty 4-way tool post on T-slotted compound
  • 2-Speed Manual tailstock, 1:1 | 4:1 quill speed ratios, 4.52" | 115 mm diameter tailstock quill
  • Built-in casted rack to the machine base and a solid swing-arm mechanism built into tailstock base features by using a lateral clamp lever to lock the tailstock onto the bed ways in non-movement position
  • Work light
  • Traveling type splash guard
  • Rear side chip and coolant fluid collect plate
  • Built-in air power supply system
  • Flood coolant system
  • Headstock and apron side control panel, apron overload safety device
  • Electrical controls and components, UL | CSA | CE or equivalent standards, please specify when ordering
  • Electrical wiring 220V/440V/3 Phase/60 Hz., prewired 220V. Other electrical wirings are available upon request
  • Shown model PB-45120-9 45" x 120" Electronic Variable Speed Large Swing Hollow Spindle Oil Country Lathe with 9.05" | 230 mm Spindle Bore and Optional Accessories installed
Swing Over Bed (In. | mm) 34.60 | 880
Swing Over Cross Slide (In. | mm) 24.01 | 610
Swing Over Gap (In. | mm) 52.75 | 1340
Gap Width from Headstock (In. | mm) 23.62 | 600
Center Height (In. | mm) 17.51 | 445
Distance Between Centers (In. | mm) 433.07 | 11000
Workpiece Weight Capacity (Lbs. | Kg) - 19.68" | 500 mm Length
at The Headstock with 4-Jaw Steel Body Chuck Clamped		 5,060 | 2,300
Workpiece Weight Capacity Between Centers, Unsupported (Lbs. | Kg) 7,700 | 3,500
Workpiece Weight Capacity Between Centers - One Steady Rest (Lbs. | Kg) 9,900 | 4,500
Workpiece Weight Capacity Between Centers - Two Steady Rests (Lbs. | Kg) 12,100 | 5,500
Spindle Bore (In. | mm) 6.023 | 153
Spindle Nose ASA A2-11
Number of Spindle Speeds 18
Spindle Speeds (RPM) 7 | 10 | 13 | 17 | 22 | 30 |
45 | 60 | 75 | 90 | 105 | 125 |
190 | 280 | 355 | 410 | 540 | 700
Cross Slide Travel ( In. | mm) 26.37 | 670
Compound Slide Travel (In. | mm) 15.74 | 400
4-Way Tool Post Width (In. | mm) 8.07 | 205
Bed Ways and Carriage Support Guide Way Design - Vee | Flat | Lateral 2 | 2 | 1
Bed Width Across Ways (In. | mm) 22.04 | 560
Bed Width with Carriage Support Guide Way (In. | mm) 25.98 | 660
Longitudinal Feed Range (IPR | MPR) .0017 - .1003 | .045 - 2.55
Cross Feed Range (IPR | MPR) .0009 - .0503 | .023 - 1.28
Longitudinal Rapid Feeds (IPM | MPM) 78.74 | 2000
Cross Rapid Feeds (IPM | MPM) 50 | 1270
Number of Inch Threads 60
Range of Inch Threads (TPI) 1/2 - 28
Number of Metric Threads 60
Range of Metric Threads (mm) 1 - 56
Number of Diametral Pitch Threads 60
Range of Diametral Pitch Threads (D.P.) 2 - 112
Number of Modular Pitch Threads 60
Range of Modular Pitch Threads (M.P.) .25 - 14
Leadscrew Threads (TPI | mm) 2 | 12
Tailstock Quill Diameter (In. | mm) 4.52 | 115
Tailstock Quill Travel (In. | mm) 7.87 | 200
Tailstock Quill Speeds 2
Tailstock Quill Speed Ratios 1:1 | 4:1
Tailstock Quill Taper MT-6
Tailstock Bearing Surface on Bed Ways (In. | mm) 19.68 | 500
Main Motor (HP | kW) 20 | 14.91
Electrical - Dual Voltage 220V/440V/3 Phase/60 Hz.,
Prewired 220V
Rapid Traverse Motor (HP | kW) 2 | 1.49
Coolant Pump Motor (HP | kW) 1/2 | 0.372
Overall Dimensions (L x W x H/In. | mm) 521.65 x 70.86 x 52.16 |
13,250 x 1,800 x 1,325
Machine Weight (Lbs. | Kg) TBA
Design and specifications are subject to change without notice.
  • One-piece Floor Type Cast Bed
  • Electromagnetic Spindle Brake System
  • Universal Inch/Metric Gear Box
  • 6-way Rapid Traverse
  • Heavy Duty 4-way Tool Post
  • Thread Chasing Dial
  • 2-speed Tailstock, 1:1 | 4:1 Quill Speed Ratios
  • Automatic Lubrication System
  • Built-in Air Power Supply System
  • Flood Coolant System
  • Traveling Type Splash Guard
  • Rear Side Chip and Coolant Fluid Collect Plate
  • Headstock and Apron Side Control Panel and Apron Overload Safety Device
  • Work Light
  • Leveling Screws and Pads
  • Operator's Manual and Parts List
  • Tool Box with Tools
  • Electrical Wirings, 208V | 240V | 380V | 400V | 415V | 460V | 480V | 575V | 600V | 690V/3 Phase/60 Hz./50 Hz., Please Specify When Ordering
  • 30 HP | 22.5 kW Main Motor
  • 40 HP | 30 kW Main Motor
  • 18 Spindle Speeds, 3.5 - 350 RPM Spindle Speed Range
  • 18 Spindle Speeds, 5 - 500 RPM Spindle Speed Range
  • 18 Spindle Speeds, 8 - 800 RPM Spindle Speed Range
  • Electronic Variable Speed Drive Headstock with 4 Auto Shift Ranges with CSS-Constant Surface Speed, 3 - 300 RPM Spindle Speed Range, 30 HP | 22.5 kW Main Motor with 40 HP | 30 kW YASKAWA® Inverter
  • Electronic Variable Speed Drive Headstock with 4 Auto Shift Ranges with CSS - Constant Surface Speed, 5 - 550 RPM Spindle Speed Range, 30 HP | 22.5 kW Main Motor with 40 HP/30 kW YASKAWA® Inverter
  • Electronic Variable Speed Drive Headstock with 4 Auto Shift Ranges with CSS - Constant Surface Speed, 10 - 1000 RPM Spindle Speed Range, 30 HP | 22.5 kW Main Motor with 40 HP | 30 kW YASKAWA® Inverter
  • Electronic Variable Speed Drive Headstock with 4 Auto Shift Ranges with CSS - Constant Surface Speed, 3.5 - 350 RPM Spindle Speed Range, 40 HP | 30 kW Main Motor with 50 HP | 37.5 kW YASKAWA® Inverter
  • Electronic Variable Speed Drive Headstock with 4 Auto Shift Ranges with CSS - Constant Surface Speed, 5.5 - 500 RPM Spindle Speed Range, 40 HP | 30 kW Main Motor with 50 HP | 37.5 kW YASKAWA® Inverter
  • Electronic Variable Speed Drive Headstock with 4 Auto Shift Ranges with CSS - Constant Surface Speed, 8 - 800 RPM Spindle Speed Range, 40 HP | 30 kW Main Motor with 50 HP | 37.5 kW YASKAWA® Inverter
  • Two-piece Type Front Chuck Cover with Limit Switch
  • Rear Chuck Adapter with Chuck Cover, ASA A2-11 Spindle Nose
  • 2-speed Tailstock, 1:1 | 4:1 Quill Speed Ratios, 5.70" | 145 mm Diameter Tailstock Quill
  • 2-speed Tailstock, 1:1 | 4:1 Quill Speed Ratios, 6.29" | 160 mm Diameter Tailstock Quill
  • 2-speed Tailstock with Built-in Rotating Quill, 1:1 | 4:1 Quill Speed Ratios, 6.29" | 160 mm Diameter Tailstock Quill
  • 2-speed Tailstock with Built-in Rotating Quill, 1:1 | 4:1 Quill Speed Ratios, 9.25" | 235 mm Diameter Tailstock Quill
  • Motorized Movement Tailstock Body
  • Hydraulic Movement Tailstock Body
  • Micrometer Carriage Stop
  • Mechanical Taper Attachment
  • Steady Rest with 3 Roller Jaws, Fixed Type, 1.96" - 15.74" | 50 mm - 400 mm Capacity
  • Steady Rest with 3 Roller Jaws, Fixed Type, 13.77" - 27.55" | 350 mm - 700 mm Capacity
  • Steady Rest with 4 Roller Jaws, U-shape Type, 6.29" - 17.71" | 160 mm - 450 mm Capacity
  • Steady Rest with 4 Roller Jaws, U-shape Type, 17.71" - 27.55" | 450 mm - 700 mm Capacity
  • Follow Rest with 3 Solid Jaws, 1.18" - 11.81" | 30 mm - 300 mm Capacity
  • Roller Supporter
  • Semi-automatic Cycle Turning Threading with Mechanical Taper Attachment System
  • Semi-automatic Cycle Turning Threading with Hydraulic Taper Attachment System
  • Hydraulic Taper and Copying System
  • Semi-automatic Cycle Turning and Threading and Hydraulic Taper and Copying System
  • Tool Post Grinding Attachment
  • 19.68" | 500 mm Face plate, A2-11 Spindle Mount
  • 31.88" | 810 mm Face Plate with Independent 4-jaw, A2-11 Spindle Mount
  • 25" | 635 mm 3-jaw Semi-steel Body Scroll Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 25" | 635 mm 3-jaw Steel Body Scroll Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 30.31" | 770 mm 3-jaw Steel Body Scroll Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 31.88" | 810 mm 3-jaw Semi-steel Body Scroll Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 31.88" | 810 mm 3-jaw Steel Body Scroll Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 25" | 635 mm 4-jaw Semi-steel Body Independent Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 25" | 635 mm 4-jaw Steel Body Independent Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 27.95" | 710 mm 4-jaw Steel Body Independent Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 30.31" | 770 mm 4-jaw Steel Body Independent Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 31.88" | 810 mm 4-jaw Semi-steel Body Independent Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • 31.88" | 810 mm 4-jaw Steel Body Independent Chuck with Top Reversible Jaws, A2-11 Spindle Mount
  • Full Length Splash Guard with Chip Conveyor and Chip Cart
  • Boring Bar Tool Holder with Linear Guide Way
  • ALORIS Super-Precision Quick Change Tool Post with 4 Tool Holders
  • ALORIS Super-Precision Quick Change Tool Post with 6 Tool Holders
  • NEWALL 2-Axis Digital Readout System Lathe Package and Control Box with Installation
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More