Name: SHARP 1640L 16" X 40" GEARED HEAD PRECISION ENGINE LATHE
Brand: SHARP
SKU: 1640L
Price: 26170.00 USD
Availability: InStock

SHARP 1640L 16" X 40" GEARED HEAD PRECISION ENGINE LATHE

Based on 0 reviews. - Write a review

$26,170.00

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

Hardened and ground alloy steel spindle supported by two high precision tapered roller bearings and one high precision ball bearing to ensure accuracy and stability
The unparalleled spindle design headstock uses special adjustable blocks can guarantee vibration free turning even irregular material on high speeds
Hardened and ground headstock gears and shafts are lubricated in oil bath
3-1/16" Spindle bore for large workpiece
Heavy duty D1-8 camlock spindle nose
Induction hardened and ground bedways for rigid structure
One-piece Meehanite® castings base for uniform construction and durability
Removable gap for large diameter applications
The special pin locks lever into position on gear shifting levers to prevent the handle out of place accidentally or being shifted during heavy cuttings
Totally enclosed oil bathed gearbox design use levers to set different threads and feeds
Inch and metric dual dials with direct readings for cross and compound feeds
Thread and feed chart for inch and metric
Directional control of carriage feed lever at side of apron for easy operations
Centralized push button controls with emergency stop and spindle jog
Tailstock has tang slot and inch/metric graduations on the quill
Electrically activated foot brake for quick stopping action
Complete coolant system equipped
Standard with full length splash guard
Dual voltage electrics for 220V/440V/3 Phase/60 Hz., specify when ordering
Photo shown with optional accessories installed

Swing Over Bed (In.)	16
Swing Over Cross Slide (In.)	8-3/4
Swing Over Gap (In.)	24-3/8
Gap Width in Front of Face Plate (In.)	9-3/4
Distance Between Centers (In.)	40
Length of Bed (In.)	59
Width of Bed (In.)	11-3/4
Cross Slide Travel (In.)	9-1/2
Compound Slide Travel (In.)	4.9
Width of Compound (In.)	4.5
Spindle Through Hole Diameter (In.)	3-1/16
Spindle Nose - Camlock	D1-8
Spindle Bore Taper (w/Sleeve)	MT-6 (MT-4)
Number of Spindle Speeds	12
Range of Spindle Speeds (RPM)	40 - 2,000
Number of Longitudinal Feeds	18
Range of Longitudinal Feeds (IPR)	.002 - .032
Number of Cross Feeds	12
Range of Cross Feeds (IPR)	.0001 - .0094
Number of Inch Threads	36
Range of Inch Threads (TPI)	4 - 56
Number of Metric Threads	17
Range of Metric Threads (mm)	.5 - 7
Leadscrew Diameter (In.)	1-3/8
Leadscrew Thread Pitch (TPI)	4
Tailstock Quill Travel (In.)	5
Tailstock Quill Diameter (In.)	2-1/4
Tailstock Quill Taper	MT-4
Main Motor (HP)	7-1/2 220V/440V/3 Phase/60 Hz., Prewired 220V
Motor Transformer Installed - Optional	380V or 575V/3 Phase
Power Consumptions (Volts \| kVA \| Amps)	220 \| 8 \| 25
Power Consumptions (Volts \| kVA \| Amps)	440 \| 8 \| 12.5
Machine Dimensions (L x W x H/In.)	85 x 32 x 47
Net Weight (Lbs.)	3,600
Design and specifications are subject to change without notice.