Name: ATEK PM SERIES PM442 42 TON X 4' PNEUMATIC PRESS BRAKE
Brand: ATEK
SKU: PM442
Price: 25675.00 USD
Availability: InStock

ATEK PM SERIES PM442 42 TON X 4' PNEUMATIC PRESS BRAKE

Based on 0 reviews. - Write a review

$25,675.00

Stock: In Stock
Model: PM442
Weight: 3,735.00lb
Dimensions:
62.00in x 38.00in x 63.00in
SKU: PM442

ATEK

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

Made in the U.S.A.
The PM Series™ press brake is a pneumatic-mechanical design, but with many new features to accommodate the higher loads and production demands associated with a 42 ton machine. Rated tonnage is developed at 100 PSI
Heavy duty box ways square the machine for leveling and precisely guide the ram throughout its vertical travel. when installing the machine, it's an easy task to square it for safe and rugged operation by using the adjustable box ways. Their open accessibility outside both side frames make for easy lubrication and maintenance. Replacement or adjustment takes just a few minutes
Elliptical, high arch design offers better balance, lessens off-center load deflection and increases bent part clearance inside the machine
Safety cover on front linkages enclose all moving parts on the ram. Unscrew the T-knob to open the cover for inspection and maintenance
Front full-length scales on the bed and ram make setting up the back gauge and tooling stations an easy task. Their position matches the position of the scales provided with optional the Smart-Gage™ CNC back gauge
Extra-long bed and ram with easy tool loading through either end. Using box ways adds 4" per end, 8" total, to the bed and ram length. The larger side frame windows give extra part clearance when unloading by sliding the part to the side
In-the-frame bed adjusting screws eliminate side frame flex. The full-frame design allows the bed adjusting screws to be mounted in the frame where no torque can be applied to flex the frames
Condition the air supply - Modular FRL unit is standard to condition air supply to pneumatic components for long life. The unit consists of an adjustable filter/regulator module with pressure gauge, adjustable flow lubricator module and a three-way lockable shut-off valve. The valve is vented to relieve downstream pressure in the off position per OSHA guidelines. Keyed padlock and lockout tag are included
Runs on compressed air - No need to worry about 3-phase power or running new electrical lines. Installation is simple. It just needs an airline. 100 PSI gives rated tonnage, but it operates anywhere from 10 to 110 PSI. Includes quiet, long-life, steel-reinforced cylinder bumpers
Full frame-to-floor design, no floor stand required. The heavier weight and higher tonnage demand a bigger and beefier design. The wide base balances the loads and leveling screws and floor mounting pads assure smooth operation even on unlevel floors
Optional with Y-axis bend angle control
- Mechanical digital readout (MDRO) to control the ram stroke
Optional with Pro-Gage® micrometer front or back gauge
- The universal system can retrofit to any brake for higher productivity. Typically mounted behind the bed, the system can also be front mounted. The system is a proven timesaver when full CNC is not
justifiable. Attach direct mounting rail to the bed for easy left to right positioning, specify length when ordering. With 25" total of X axis travel, 9" of vertical adjustment, and 180° of rotary tube motion, these
units handle a broad matrix of applications. Includes flip fingers, horizontal adapter blocks and protractor scales
- Precision adjustment dial with brass pointer, revolving handle and knurled locking ring. 0.001" Graduations and 0.050" per dial revolution
- The heavy-duty adapter block solidly accommodates fingers or specials for develop
- Offers the rigidity of the direct mount rail available in lengths of 3', 4', 6' and 8'
- Maximum back gauge depth is reduced by 2" when equipped with micro-adjustable gauge
Optional with Smart-Gage™ CNC back gauge
- It is very user-friendly requiring minimal operator training. Simply select "Edit" mode, move the cursor to the desired line, key in new or over existing data, select "Single" or "Auto" and go! In the
"Auto" mode when the ram retracts to the top, the gauge moves to the next position automatically, or if entered, to the rear to ease part loading or repositioning for the duration of the retract delay
- An Acu-Rite® linear encoder detects position directly at the gauge bar ensuring positional accuracy regardless of servomechanism errors. Other manufacturers use a rotary encoder mounted on the
motor. This method only measures armature position. Any system backlash is not detected resulting in positional errors and poor repeatability
- Two rugged, flip finger assemblies with quick clamps, makes setups easy and fast without tools. Strong enough to handle the abuse of heavy material forming. High visibility scales aid positioning
- Gauge frames mount to the press brake side frames for stable operation. The rear of the side frames, not the bed, is the best location for repeatable performance in a precision gauging system. Utilizes
existing hole patterns in the housings for simple and fast in-field installation. Installation can be performed in less than two hours
- Specify inch or metric unit and input power voltage when ordering
Optional with two hand safety control
- This control keeps the operator's hands away from the point of operation without sacrificing complete foot pedal control. Both pushbuttons must be pressed and held for air to flow to the foot pedal.
Includes the front workpiece support table
Optional with segmented, safety clamp ram
- It holds safety or hook-tongue tooling while the clamp action design easily holds short tool segments. The flip lever, spring-loaded ram clamps are 5-1/2" long and mount on 6" centers. Safety or
hook-tongue tooling hooks into the clamps. When the clamps are loosened, the tooling cannot drop out of the ram thus eliminating a safety hazard and/or preventing tooling damage. Using safety tongue
tooling is particularly important when using long or tall tooling that is very heavy
Optional with front workpiece support table
- It is vertically adjustable and conveniently supports a supply of small workpieces to be bent. Measurement left to right is equal to the bed width and is 12" deep. The vertical adjustment allows its top
surface to be level with the tops of most bottom dies. This welded and reinforced support can also be used for clamping angle stops or other front positioning devices
Optional with additional tooling space side frames
- Increase tooling space by using taller side frames. Use with commercially available tool clamping systems, box forming punches or to accommodate the special, extra-tall tooling. Standard ram stroke
applies for the unit. Standard tooling can be used, but may require a ram spacer to take up the extra space
Atek press brake tooling is standard American-style, steel press brake tooling for use in all press brakes. Just as Atek’s press brakes fill the small-machine void left by the large press brake manufacturers, this press brake tooling meets the need of many small part and work cell manufacturers. The press brake tooling is available on short, cut-to-length tooling at a reasonable price. Other tool styles, tool modification and machining, and special tools are also available
Photo shown model PM642 with optional Smart-Gage™ CNC Back Gauge
CAUTION: Always wear eye, face, arm, leg and body gear protection when using this or any other press brake

Tonnage Capacity at Mild Stroke (Ton \| PSI)	42 \| 100
Tooling Space (In.)	9-1/2
Ram Stroke (In.)	0 - 2
Bed Adjustment Up (In.)	0 - 3
Throat Depth (In.)	6
Shut Height (In.)	9-3/4
Bed and Ram Thick (In.)	1-3/4
Ram Height (In.)	16-1/4
Bed Width (In.)	56
Between Housings (In.)	48-1/4
Back Gauge Depth (In.) - Between Housings - Between Cylinders	0 - 19 21
Full Stroke Free Air (CFS)	7.6
Maximum Speed at Full Stroke (SPM)	20
Overall Dimensions (L x W x H/In.)	62 x 38 x 63
Shipping Weight (Lbs.)	3,735
Smart-Gage™ CNC Back Gauge Specifications
Display Control	4 Lines - Job No. \| Bend No. \| Dimension \| Seconds of Delay, 5 Characters\|Line, Backlit LED
Data Entry Via Keypad (Key)	16
Resolution (In.)	.001
Parts Program Storage Capacity (Parts)	99
Maximum Bends Per Part (Bends)	9
Retract Delay (Seconds)	0 - 9
Memory	Non Volatile Internal Battery Back-Up
X-Axis Travel from Bend Line (In.)	0 - 12
Vertical Finger Adjustment (In.)	2
Left to Right Finger Adjustment - Bed Width Less (In.)	5
Maximum Speed (IPM)	500
Accuracy (In.)	± .002
Repeatability (In.)	± .002
Braking Load (Lb.)	400
Electrical Input Power	110V/1 Phase/60 Hz.
Electrical Input Power	220V/1 Phase/50 Hz.
Electrical Fuse Size (AMP)	2
Electrical Control Voltage (VAC)	24
Design and specifications are subject to change without notice.

4150 Tool Steel Die Set, Consisting of A 90° Top Punch and 3/4" Bottom Vee Die in A 4' Length
Removable Die Holder, Accepts American Style Tooling
Complete Modular FRL Unit with OSHA Lockout
Safety Hooded Foot Pedal with Toe Flip Cover
Tamper-Proof Speed Control Valve
Quick Exhaust with Muffler
Manual Back Gauge with Screw-Adjustable Finger Stops