Name: BAILEIGH 1008232 VM-949-1 9" X 49" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR
Brand: BAILEIGH
SKU: 1008232
Price: 23439.00 USD
Availability: InStock

BAILEIGH 1008232 VM-949-1 9" X 49" ELECTRONIC VARIABLE SPEED VERTICAL MILLING MACHINE WITH MITUTOYO 2-AXIS DRO AND X, Y & Z-AXIS POWER FEEDS & POWER DRAW BAR

Based on 0 reviews. - Write a review

$23,439.00

Stock: In Stock
Model: VM-949-1
Weight: 2,200.00lb
Dimensions:
60.00in x 60.00in x 83.03in
SKU: 1008232

BAILEIGH

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

This vertical milling machine is no exception and is great for any small to medium size machine shop or fabrication shop, it's packed with tons of standard features that are options on most other brands
This vertical milling machine is a fully variable speed through the use of a YASKAWA® inverter drive
Available in two different voltages, 220 Volt/1 Phase and 3 Phase, these variances allow it to be used in almost any shop
Adjustable spindle speeds from 60 to 4,200 RPM, help prolong tooling life as well as allows some applications that cannot be done on a standard drill press, such as thermal friction drilling
MITUTOYO® 2-Axis digital readout system for positioning down to 1/10 of a thousandth of an inch
Powerful 3 HP | 2.23 kW motor that runs on 220V/1 Phase/60 Hz. electric power
The best castings to make the base and frame work out of for better the cutting is. This is not the place to use an inferior process
The spindle has specified a NMTB-40 spindle taper. This type spindle is stronger and give the operator a choice of larger tooling should the need arise
Spindle head can swivel 90° right or left and 45° front or rear, the ram can revolve horizontally by an angle of 180°
3 Position - Forward | Stop | Reverse, switch to control rotation of spindle
Micro feed spindle headwheel, when engaged, this manual moves the quill down or up at slow speed
Depth stop adjusted, can be set to limit the downward travel for the quill, provides a repeatable depth of travel
Operation control box houses the lamp and coolant switches, the emergency stop button, and the power control
Electrical enclosure houses electrical components and wire terminal strips
Machine base supports milling machine and houses the coolant tank
Chip and drip tray collect chips and coolant which goes bank to tank

Table Size (W x L/In. \| mm)	9.055 x 49.015 \| 230 x 1,245
Spindle Taper	NMTB-40
Number of Spindle Speeds	Electronic Variable Speed
Range of Spindle Speeds (RPM)	60 - 4,200
Spindle Diameter (In. \| mm)	3.346 \| 85
Spindle Feed per Revolution (IPR \| MMPR)	.0015 \| .003 \| .005 \| .0381 \| .0762 \| .127
Spindle Travel (In. \| mm)	5 \| 127
Spindle Head Swivel (Right or Left \| Front or Rear)	90° \| 45°
Spindle Nose to Table (Min. - Max./In. \| mm)	2.24 - 18.22 \| 57 - 463
Spindle Center to Column (Min. - Max./In. \| mm)	8.46 - 20.98 \| 215 - 533
Table Longitudinal Travel/Manual - X-Axis (In. \| mm)	28.54 \| 725
Table Cross Travel/Manual - Y-Axis (In. \| mm)	12 \| 305
Table Knee Travel/Manual - Z-Axis (In. \| mm)	15.98 \| 406
Table Longitudinal Travel/Auto - X-Axis (In. \| mm)	25.19 \| 640
Table Cross Travel/Auto - Y-Axis (In. \| mm)	12 \| 305
Table Knee Travel/Auto - Z-Axis (In. \| mm)	15.98 \| 406
Ram Cross Travel (In. \| mm)	12.59 \| 320
Table Load Capacity (Lbs. \| Kgs.)	440.92 \| 200
Table T-Slots (Number @ Width/In. \| mm)	3 @ .625 \| 15.875
Spindle Motor (HP \| kW)	3 \| 2.23
Electric Power Requirement	220V/1 Phase/60 Hz.
Coolant Pump Motor (HP \| Watt)	1/8 \| 93.21
Shipping Dimensions (L x W x H/In. \| mm)	60 x 60 x 83.03 \| 1,524 x 1,524 x 2,109
Shipping Weight (Lbs. \| Kgs.)	2,200 \| 997.9
Design and specifications are subject to change without notice.