Name: WELLSAW 1316S-SA 13" X 16" SEMI-AUTOMATIC SWIVEL HEAD MITER HORIZONTAL BANDSAW
Brand: WELLSAW
SKU: 1316S-SA
Price: 24214.00 USD
Availability: InStock

WELLSAW 1316S-SA 13" X 16" SEMI-AUTOMATIC SWIVEL HEAD MITER HORIZONTAL BANDSAW

Based on 0 reviews. - Write a review

$24,214.00

Stock: In Stock
Model: 1316S-SA
Weight: 1,810.00lb
Dimensions:
76.00in x 90.00in x 0.00in
SKU: 1316S-SA

WELLSAW

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

Manufactured in the U.S.A.
PLC Controlled, full cycle semi-automatic operation
The PLC controller is factory programed and manages the raise and lower functions of the saw head and the open and close functions of the vise jaw in a programmed sequence. In high volume operations this increases productivity and reduces operator fatigue and error
Full cycle operation:
• at the end of the cut the saw head rises to a pre-selected level
• the vise opens
• the operator advances the stock and presses the “Automatic” button
• the vise closes and the saw head approaches and makes the next cut
True swivel head miters to 60° - no need to swivel the stock
Saw head swivels on precision ball bearings
Large protractor for accurate angle selection
Wet cutting system with full surround pan
Rigid welded steel frame with precision ground bed and vise jaws
Infinitely variable blade speeds
Combination reduction gearbox and perimeter ring gear blade drive
Powered frame raise and air powered quick position vise control
Variable hydraulic feed rate control with counterbalance spring
Zero clearance carbide guides with rollers with pre-loaded spring
Rite-Tension® Blade tensioning device
Powered blade brush
Auto shut-off at end of cut
Adjustable stock stop
Flood coolant system with 8 gallons tank capacity and submersible pump
Magnetic starter with overload and undervoltage protection
110 Volts at controls
OSHA Blade guarding

Cutting Capacity at 90°: Round (H/In.) Rectangle (H x W/In.)	13 13 x 16
Cutting Capacity at 45°: Round (H/In.) Rectangle (H x W/In.)	11-1/2 13 x 11-1/2
Cutting Capacity at 60°: Round (H/In.) Rectangle (H x W/In.)	8 8-1/2 x 8
Blade Speeds - Infinitely Variable (SFPM)	70 - 375
Blade Size (W x THK x L/In.)	1 x .035 x 150
Blade Wheel Size - Cast Iron (Diameter/In.)	15
Stock Stop Projection (In.)	25
Bed Height (In.)	35
Coolant Tank Capacity (Gallons)	8
Main Motor (HP)	3, 230V/3 Phase/60 Hz.
Floor Area Dimensions (W x L/In.)	90 x 76
Shipping Weight (Lbs.)	1,810
Design and specifications are subject to change without notice.

1"W x .035" THK x 150"L Tiger-Tooth® Bi-Metal Blade
Adjustable Stock Stop
Work Light with 250VA Transformer
Coolant System
5'L x 18"W Infeed Roller Conveyor

2 HP Motor - 115V/1 Phase/60 Hz.
2 HP Motor - 208V/1 Phase/60 Hz.
2 HP Motor - 230V/1 Phase/60 Hz.
3 HP Motor - 208V/3 Phase/60 Hz.
3 HP Motor - 460V/3 Phase/60 Hz.
Frequency Type Variable Band Speed Drive - AC Motor
Blade Break - Stall Switch
Laser Line Pointer
Flush Hose Kit with Hi-Output Pump
Casters with 2 Locking - Set of 4
NFPA Electrics - NEMA Type 1 Lever Type Fused Disconnect
NFPA Electrics - NEMA Type 12 Rotary Type Fused Disconnect
MQL Lubricant System - Minimum Quantity "Near Dry"
1 Gallon Lubricant for MQL System
Leveling Vibration Mounts
Overhead Bundle Clamp Air Powered with Manual Control
18" Wide Roller, 250 Pounds Capacity Medium Duty Stock Stand
6" Wide Roller, 1,000 Pounds Capacity Heavy Duty Stock Stand
12" Wide Roller, 1,000 Pounds Capacity Heavy Duty Stock Stand
5'L x 18"W, 35" Bed Height, 2 Legs, 3,300 Pounds Capacity Non-Powered Roller Conveyor
10'L x 18"W, 35" Bed Height, 3 Legs, 3,300 Pounds Capacity Non-Powered Roller Conveyor
5'L x 24"W, 35" Bed Height, 2 Legs, 3,300 Pounds Capacity Non-Powered Roller Conveyor
10'L x 24"W, 35" Bed Height, 3 Legs, 3,300 Pounds Capacity Non-Powered Roller Conveyor

WELLSAW 1316S-SA 13" X 16" SEMI-AUTOMATIC SWIVEL HEAD MITER HORIZONTAL BANDSAW

Products

Policies

My Account

Customer Service