Menu
Your Cart

VICTOR 618EVS 11" X 18" ELECTRONIC VARIABLE SPEED TOOLROOM LATHE

SHIPPING & DELIVERY
Call us now
Ask a question
VICTOR 618EVS 11" X 18" ELECTRONIC VARIABLE SPEED TOOLROOM LATHE
VICTOR 618EVS 11" X 18" ELECTRONIC VARIABLE SPEED TOOLROOM LATHE
Based on 0 reviews. - Write a review
$31,100.00
  • Stock: In Stock
  • Model: 618EVS
  • Weight: 2,222.00lb
  • Dimensions:
  • 74.00in x 34.00in x 74.00in
  • SKU: 618EVS
VICTOR VICTOR
Add to Cart
Buy Now Question
Add to Wish List Compare this Product
  • Super precision toolroom lathe comes with a smooth 3 HP frequency-controlled motor with YASKAWA® inverter drive that runs virtually vibration free and extremely quiet. With fewer mechanical parts and exceptional built quality, it is easy to maintain and provides superior accuracy and performance
  • 0 - 4,000 RPM Electronic infinitely variable spindle speeds. Easy to read digital display on actual spindle RPM
  • Spindle runout accuracy within 50 millionths T.I.R.
  • Hardened and precision ground spindle mounted on high precision preloaded angular contact ball bearings
  • Hardened and precision ground alloy tool steel bedways
  • Turcite B slideway bearing surface between carriage and bed
  • Electric variable feed control on carriage and cross slides
  • Dual range inch/metric quick change gearbox
  • Automatic thread length control with fine adjustable stops to provide accurate threading
  • Quick-action tool post slide for threading
  • On-piece casting tailstock, offering maximum rigidity and accuracy
  • Tailstock spindle has tang slot and inch/metric graduations
  • One shot lubrication system is conveniently located for ease of use
  • Electrically activated foot brake for quick stopping action
  • Centralized low voltage controls with emergency stop
  • Sturdy base with built-in tool storage cabinet
  • Standard equipped with 5C lever type collet closer
  • Voltage requires 220V/3 Phase/60 Hz. or 220V/1 Phase/60 Hz. electric, please specify when ordering
Swing Over Bed (In. | mm)
 11 | 280
Swing Over Cross Slide (In. | mm)
 6 | 152.4
Swing Over Carriage (In. | mm) 9 | 228.6
Distance Between Centers (In. | mm)
 18 | 457
Spindle Capacity (In. | mm)
- with Jaw Chucks
- with Expanding Collets
- with Round 5C Collets
- with Hexagon 5C Collets
- with Square 5C Collets
- with Step Chucks
5 | 127
3 | 76
1-1/16 | 27
7/8 | 22
3/4 | 19
1-1/16 - 6 | 27 - 152.4
Spindle Nose Diameter (In. | mm)
2.189 | 55.6
Spindle Nose Taper
- Inside
- Outside with Chuck
5C | 10°
4°
Electronic Variable Spindle Speeds (RPM)
- for 6" 3-Jaw Chuck
- for 5C Collet Closer
0 - 3,000
0 - 4,000
Spindle Through Hole Diameter (In. | mm)
 1-1/4 | 31.75
Carriage Power Feed Range (In. | mm)5/16 - 7 | 8 - 178
Cross Slide Power Feed Range (In. | mm)
 3/16 - 4 | 5 - 102
Cross Slide Travel (In. | mm)
 6 | 152.4
Quick-Action Compound Slide Travel (In. | mm)
 .1 | 2.5
Compound Slide Travel (In. | mm)3 | 76
Tailstock Spindle Diameter (In. | mm)
 1.358 | 34.5
Tailstock Spindle Taper
 MT-2
Tailstock Spindle Travel (In. | mm)
 3-3/4 | 95
Leadscrew Diameter (TPI | mm)
 1 - 8 | 25.4
Number of Inch Threads
 36
Range of Inch Threads (TPI)
 11 - 108
Number of Metric Threads 36
Range of Metric Threads (mm)
 .275 - 2.7
Main Motor (HP | kW)
 3 | 2.237,
220V/3 Phase/60 Hz.
or
220V/1 Phase/60 Hz.
Prewired 220V/3 Phase
Coolant Pump Motor (HP | kW)
 1/8 | .093
DC Feed Motor (Watts | Amps)
 70 | .583
Net Weight (Lbs. | Kgs.)
 1,826 | 830
Gross Weight (Lbs. | Kgs.)
 2,222 | 1,010
Machine Dimensions (L x W x H/In. | mm)
 73 x 30 x 67 | 1,855 x 762 x 1,702
Machine Packing Dimensions (L x W x H/In. | mm)
 74 x 34 x 74 | 1,880 x 864 x 1,880
Design and specifications are subject to change without notice.
  • Chuck Cover with Limit Switch
  • 5C Lever Type Collet Closer
  • 5C Collet Closer Guard
  • 5C Collet Holder Racks
  • Tool Holder
  • Halogen Work Light
  • Complete Coolant System
  • Toolbox with Tools
  • 440V Conversion
  • 6" Adjustable 3-Jaw Scroll Chuck with 4° Back Plate
  • 6" Adjustable 6-Jaw Scroll Chuck with 4° Back Plate
  • 6" 4-Jaw Independent Chuck with 4° Back Plate
  • Steady Rest
  • Follow Rest
  • Face Plate
  • Angle Plate
  • 3-3/8" Diameter 5C Collet Fixture Plate
  • 4-3/8" Diameter 5C Collet Fixture Plate
  • 5C Round Collet Set
  • 5C Headstock Center with Drive Plate
  • Driving Dog
  • Taper Turning Attachment
  • Radius Turning Attachment
  • Micro Carriage Stop with Micrometer and Indicator
  • 4-Position Indexable Tool Post - 3/8" Square Shank
  • Tool Setting Gage
  • Vertical Cut-Off Slide without Cut-Off Blade
  • Rear Tool Holder Slide Assembly
  • Live Center, MT-2
  • Chip and Coolant Shield - High Impact Resistance LEXAN Polycarbonate Resin
  • ALORIS AXA Series Quick Change Tool Post with 4 Tool Holders
  • NEWALL DP700 2-Axis Digital Readout System Tool Room Lathe Package with Installation
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More