Name: SHARP 2480V 24" X 80" EXTRA HEAVY DUTY GEARED HEAD ENGINE LATHE
Brand: SHARP
SKU: 2480V
Price: 75195.00 USD
Availability: InStock

SHARP 2480V 24" X 80" EXTRA HEAVY DUTY GEARED HEAD ENGINE LATHE

Based on 0 reviews. - Write a review

$75,195.00

Stock: In Stock
Model: 2480V
Weight: 8,360.00lb
Dimensions:
135.00in x 53.00in x 63.00in
SKU: 2480V

SHARP

Add to Cart

Buy Now Question

Add to Wish List Compare this Product

Headstock with clutch allows the motor to continue to run while the spindle is switched from forward to reverse
Hardened and ground alloy steel spindle supported by two TIMKEN® high precision tapered roller bearings and one high precision ball bearing to ensure accuracy and stability
The unparalleled spindle design headstock uses special adjustable blocks can guarantee vibration free turning even irregular material on high speeds
Nickel-Chrome alloy steel headstock gears are hardened and ground
Headstock is equipped with lubrication system for gears and shafts, providing smooth and quite operation
4-1/8" Spindle bore for large workpiece
Removable gap for large diameter applications
Heavy duty D1-11 camlock spindle nose
One-piece Meehanite® castings base for uniform construction and durability
Induction hardened and ground bedways for rigid structure
19" Wide bedway
Totally enclosed oil bathed gearbox design use levers to set different threads and feeds
Inch and metric dual dials with direct readings for cross and compound feeds
Wide range of feeds and threads is conveniently located on the chart for inch and metric near the selector levers
The special pin locks lever into position on gear shifting levers to prevent the handle out of place accidentally or being shifted during heavy cuttings
Directional control of carriage feed lever at side of apron for easy operations
4-Way rapid traverse movement
Fully adjustable tapered gibs on cross slides provide wear compensation and long life
30-1/4"W x 26-3/4"L Large carriage
Centralized push button controls with emergency stop and spindle jog
4:1 Reduction ratio dual speed tailstock has tang slot and inch/metric graduations on the quill
Electro-Dynamic activated foot brake for quick stopping action
Complete coolant system equipped
Dual voltage electrics for 220V/440V/3 Phase/60 Hz., specify when ordering

Swing Over Bed (In.)	24
Swing Over Cross Slide (In.)	14-3/4
Swing Over Gap (In.)	33
Distance Between Centers (In.)	80
Width of Bed (In.)	19
Height of Bed (In.)	15-3/4
Cross Slide Travel (In.)	14-3/4
Compound Slide Travel (In.)	9
Spindle Through Hole Diameter (In.)	4-1/8
Spindle Nose - Camlock	D1-11
Spindle Bore Taper (w/Sleeve)	MT-7 (MT-5)
Number of Spindle Speeds	18
Range of Spindle Speeds (RPM)	10 - 1,200
Range of Longitudinal Feeds (IPR)	.0015 - .2
Range of Cross Feeds (IPR)	.0006 - .16
Number of Inch Threads	60
Range of Inch Threads (TPI)	1/4 - 84
Number of Metric Threads	60
Range of Metric Threads (mm)	.2 - 112
Number of Diametral Pitch Threads	55
Range of Diametral Pitch Threads (DP)	1 - 240
Number of Modular Threads	55
Range of Modular Threads (MP)	.05 - 28
Leadscrew Diameter (In.)	1-1/2
Leadscrew Thread Pitch (TPI)	2
Tailstock Quill Travel (In.)	7-1/2
Tailstock Quill Diameter (In.)	3-1/8
Tailstock Quill Taper	MT-5
Main Motor (HP)	15, 220V/440V/3 Phase/60 Hz., Prewired 220V
Motor Transformer Installed - Optional	380V or 575V/3 Phase
Power Consumptions (Volts \| kVA \| Amps)	220 \| 15 \| 40
Power Consumptions (Volts \| kVA \| Amps)	440 \| 15 \| 20
Machine Dimensions (L x W x H/In.)	135 x 53 x 63
Net Weight (Lbs.)	8,360
Design and specifications are subject to change without notice.