Menu
Your Cart

VICTOR 28160RS PRECISION HEAVY DUTY ENGINE LATHE

SHIPPING & DELIVERY
Call us now
Ask a question
VICTOR 28160RS PRECISION HEAVY DUTY ENGINE LATHE
VICTOR 28160RS PRECISION HEAVY DUTY ENGINE LATHE
Based on 0 reviews. - Write a review
$71,900.00
  • Stock: In Stock
  • Model: 28160RS
  • Weight: 10,580.00lb
  • Dimensions:
  • 237.00in x 52.00in x 71.00in
  • SKU: 28160RS
VICTOR VICTOR
Add to Cart
Buy Now Question
Add to Wish List Compare this Product
  • Designed to provide outstanding performance and structural rigidity
  • 20 HP Main motor
  • 4-1/8" spindle bore with D1-11 camlock spindle nose
  • The precision ground spindle is supported at three points by high-precision bearings
  • Heavily ribbed wide bed with induction hardened and precision ground bed ways for rigidity and low vibration
  • Hardened and precision ground alloy steel gears and shafts
  • Universal gearbox for inch, metric, D.P., and module threading without changing gears
  • Automatic and manual dual-mode lubrication system for slideways
  • Adjustable safety overload device
  • The tailstock quill is equipped with 4:1 reduction gearing ratio to provide easy drilling operation
  • Automatic stopper for longitudinal feeds
  • 2-Way longitudinal power rapid traverse equipped
  • Photo shown model 2880RS Precision Heavy Duty Engine Lathe with Optional Accessories
Swing Over Bed (In. | mm) 28.74 | 730
Swing Over Cross Slide (In. | mm) 19.68 | 500
Swing in Gap (In. | mm) 40.15 | 1,020
Width of Gap (In. | mm) 11.96 | 304
Width of Bed (In. | mm) 18.11 | 460
Distance Between Centers (In. | mm) 157.48 | 4,000
Spindle Bore Diameter (In. | mm) 4.133 | 105
Spindle Sleeve Taper
 MT-5
Spindle Nose Type D1-11 Camlock
Number of Spindle Speeds 12
Range of Spindle Speeds (RPM) 15 - 1,000
Cross Slide Travel (In. | mm) 16.73 | 425
Compound Slide Travel (In. | mm) 9.84 | 250
Leadscrew Diameter (In. | mm) 1.77 | 45
Leadscrew Thread Pitch (TPI)
 2
Longitudinal Feed Range (IPR | MMPR x Kinds)
 .0019 - .0275 | .05 - .7 x 36
Cross Feed Range (IPR | MMPR x Kinds)
 .0009 - .0137 | .025 - .35 x 36
Range of Inch Threads (TPI x Kinds) 2 - 28 x 36
Range of Metric Threads (mm x Kinds) .8 - 14 x 38
Diametral Pitch Threads (D.P. x Kinds) 4 - 56 x 36
Module Pitch Threads (M.P. x Kinds) .5 - 7 x 24
Taper of Tailstock Quill
 MT-5
Tailstock Quill Travel (In. | mm) 9.05 | 230
Tailstock Quill Diameter (In. | mm)
 3.149 | 80
Tailstock Quill Feed Ratio - 2 Speeds
 1:1 | 4:1

Main Motor (HP | kW)
 20 | 14.91
220V/440V/3 Phase/60 Hz.,
Prewired 220V
Coolant Pump Motor (HP | W) 1/8 | 93.21
Shipping Dimensions (L x W x H/In.)
 237 x 52 x 71
Gross Weight (Lbs.) 10,580
Design and specifications are subject to change without notice.
  • Steady Rest with Roller Jaws, 7.25" - 17.5" Capacity
  • 4-Way Tool Post
  • Chuck Cover with Limit Switch
  • Halogen Work Light
  • 2-Way Longitudinal Power Rapid Traverse with Factory Installed
  • Foot Brake
  • Complete Coolant System
  • 6.02" Spindle Bore Upgrade, A2-11 Spindle Nose
  • 4-Way Rapid Traverse Upgrade, Factory Installed
  • 15" 3-Jaw Scroll Chuck, D1-11 Camlock
  • 15" Adjustable 3-Jaw Scroll Chuck with D1-11 Back Plate
  • 15" Adjustable 6-Jaw Scroll Chuck with D1-11 Back Plate
  • 20" 3-Jaw Scroll Chuck, D1-11 Camlock
  • 20" 4-Jaw Independent Chuck, D1-11 Camlock
  • 25" 4-Jaw Independent Chuck, D1-11 Camlock
  • Steady Rest with Roller Jaws, 3.25" - 11.8" Capacity
  • Steady Rest with Roller Jaws, 7.25" - 17.5" Capacity
  • Follow Rest
  • 25" Face Plate, D1-11 Camlock
  • Micro Carriage Stop
  • Taper Turning Attachment with Installation
  • On-Carriage Splash Guard
  • Full Length Splash Guard
  • ROYAL Live Center, MT-5
  • ALORIS Quick Change Tool Post with 4 Holders
  • ALORIS Quick Change Tool Post with 6 Holders
  • NEWALL NMS800 2-Axis Digital Readout System Lathe Package with Installation
This website uses cookies to ensure you get the best experience on our website. This use may include analytics, personalization and ads. Learn More